You are here: Home » LX 3122HF-3IN1 thermoforming machine
LX 3122HF-3IN1 thermoforming machine
{-stralt-}
Description

BRIEF

LX 3in1 is a full electric and complete automatic thermoforming machine which can produce all kinds of disposable packaging like tray,lid,container, clamshell etc. in PP PET BOPS HIPS PVC etc. plastic sheet.

it is a post-trim type machine which can perform forming, cutting ,stacking and counting in 3 separate stations by taking advantage of cam system and servo system .

Also It can combine function of cut-in-place into forming station with steel-rule-knife to perform form and cut at the same station.

Design Feature

Form+Cut+Stack in the same machine

Trim-in-place with steel-rule-knife is available for identical trimming

Extra Hole-punch Station is available

Floating knife for cutting tool is available for post-trim

Full Electrical Drive minimizes power consumption and make operation easier

Precise index accuracy utilizing Servo drive system, minimizing plastic scrap

Positive forming and Negative forming(air pressure forming plus vacuuming forming)

Automatic Stacking, Counting and conveying system

Accessing to all digitalized functions by pressing touch screen

Touch screen and programmable PLC control

PID temperature control ensures precise temperature accuracy

Automatic lubrication and center oiling

Little maintenance effort required and long intervals between maintenances

Most of Components are from multi-national suppliers assures a reliability and worldwide compatibility

Lateral quick changing tools(moulds) from one side of machine

Use of Steel rule knife minimizes cost

1-2days for line knife making,minimizing cost of operation

Specification
LX3122
LX2012

Forming Area

800*600mm Max.

500*300mm

Depth of Draw under sheet

120 mm Max

120 mm Max

Depth of Draw above sheet

15 mm Max.

15 mm Max.

Clamping force

750KN

300KN

Suitable material

PP PET PS PVC BOPS

PP PET PS PVC BOPS

Sheet Width

460- 850 mm

360- 540 mm

Material Thickness Range

0.2-1.5mm

0.15-1.5mm

Material Roll Diameter

1000mm Max

600mm Max.

Dry run Speed

40cycles/min

30cycles/min

Power Supply

3-N AC380V±15V

(others at request)

Power consumption

Approx.35kw/hr

20kw/hr

Air Pressure

0.7Mpa

Air Consumption

200 Liters/min

100liters/min

Dimensions

11.5m*2.2m*2.2(L*W*H)

FAQ

What can IM Model do?

It produces clamshell,container,lid, tray and dish with rolled-lip

What material IM mdoel can process?

It can mainly process PP PET BOPS PS PVC sheet

What is MAX. speed of praticl production?

As far as we tested, it is 33cycles/min for 0.2mm PET . for higher speed , we still need more testing

What is Trim-in-place and what is post-trim?

Trim-in-place means forming and cutting inside the same mould .

Post-trim means cutting after forming.

what is different among IM 2in1 ,IM 3in1 and IM 4in1?

*IM-2in1 does forming and cutting in the same station with steel-rule-knife.

It can makes any packaging if there is no requirement of making holes on it.

*IM-3in1=IM-2in1+ second cut-press , it can do trim-in-place process and post-trim process . it means it can do cutting after forming station and in forming station.

*IM-4in1=IM-2in1 +second cut-press +thrid cut-press, it can do trim-in-place and post-trim process and also do hole-punching .

6. what is the advantage of trim-in-place ?

* bring indentical trimming for parts made in film with high shrinkage rate like pure PP .

* no wasting time on adjustting accuracy of trimming

*no wasting money to make an independent cutting tool

Technical support

Upon receiving the deposit, we will offer the following technical services:

1. Make drawings of your project for your approval after receiving your samples

2. Provide mould drawings .

3. Provide electric diagram .

4.provide drawings of sensor layout, pneumatic layout, sensor layout and motor layout

5.provide picture of labeling of all electric parts and pneumatic parts.

6. Free technical suggestions on adjusting of equipment layout and application.

5. Equipment upgrading (customers need to pay the cost);

Quality assurance

1. Strictly conforming to ISO9001-2000 quality management system an and Security conforming to CE ;

2. Strict control from purchasing inspection, process inspection to final proofing;

3. Established several QC departments to execute quality control regulations;

4. Detailed quality control examples:

(1) Complete files for quality control and quality feedback;

(2) Strict inspection for the components to assure products free of damage and avoid rust-eaten and paint peeling off later on.

(3) Only qualified components will be assembled and total equipment must be inspected completely before sale.

After sale service

1. we can offer a full training in our factory on operation and maintain

2. Installation and commissioning in buyer’s factory is available with all cost caused by visit on buyer’s account.

3. The warranty is one year. And after one year of warranty, service is still available with cost on buyer’s account if it involves parts changing.

All information is subject to change and our confirmation


LX Plastics Machinery Ltd.
Yudu Road No.256, RUIAN Industrial Zone. CHINA. city zip 325200
www.lxplastic.com


Send Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@lxplastic.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

  • Subject:
  • *Name:
  • *E-mail:
  • Company Name:
  • Tel:
  • Fax:
  • Country:
  • Products:
  • Message:
Related Products
Copyright © 2017 LXPLASTIC MACHINERY LMITEDLimited All Rights Reserved.